DENTAL TABLE

СЗТ-1 ГКСН 250.01.000.000
СЗТ-2 ГКСН 250.02.000.000

  

BASIC PARAMETERS AND CHARACTERISTICS

Dental tables belong to the technological equipment, they are intended for use as a workplace for dental technicians in the execution of basic work on the manufacture of dentures, maxillofacial prostheses, orthodontic devices and devices.

   

The tables are a composite metal structure, on which a table top with a shelf on it is placed on top with blocks of electrical outlets and brackets with lamps. Bottom on the edges of the countertop there are two curbstones, one with four drawers, the other with a control unit and one drawer, in which there is a hood unit and a control unit. Between the cupboards is mounted a pull-out table of the autonomous extractor device (only for the СЗТ-1 table), which connects the hose for the vacuum cleaner with the cabinet and the extractor unit. The power for suctioning the waste of the treatment of the extractor is regulated by the control unit. In the complete set with tables the support for feet is applied.

      The tables and units are manufactured in climatic design УХЛ 4.2 по ГОСТ 15150.

      Tables meet the requirements ГОСТ 12.2.091, ГОСТ

 
 

 SPECIFICATIONS

  

Parameters

Parameters values

СЗТ-1

СЗТ-2

1. Tables are connected to an alternating current network

voltage, V

frequency, Hz            

 

230+10% 

50+2%

 

230+10% 

 50+2%

2. Total power of electrical products connected to the table sockets, V•А, no more than

3000

3000

3. Power consumption, W, not more than

1632

1632

4. Fixture of local illumination, dust and moistureproof 2х58 W, IP 65, pcs.  

2

2

5. Luminescent lamp OSRAM L 58W / 965 Biolux, pcs.

4

4

6. Illumination of the working surface, LK, not less than

500

500

7. Hood unit:

- power consumption, W, not more than

- suction power, W, within

- equivalent sound level, dBA, not more than

 

1400

320-350

 80

 

1400

320-350

80

8. Overall dimensions of the table, mm, not more than

length

width

height

               

 

1600

800

1900

 

1600

800

1900

9. Weight, kg, no more than

140

120

          Materials and purchased component products used for the manufacture of tables and installations comply with the requirements of ТНПА(technical normative legal act, Republic of Belarus) for these products, technical documentation and authorized for use in the territory of the Republic of Belarus.

 

DESIGN

     

The tables consist of: worktops with armrests, pedestals with control unit and one drawer, in which there is an extractor unit, a pull-out table of an autonomous extractor device (except for the NWT-2 table), a shelf with two blocks of electric outlets and a bracket with two lamps, chair, footrest and hose for vacuum cleaner.

       Note - delivery is allowed in separate parts.

       The total static load is not more than 60 kg.

       Due to constant technical improvement, the design of the dental table can have minor changes, while all the main characteristics are preserved.